Methods of Ventilation in Tunnels – CivilNotePpt
Methods of Ventilation in Tunnels The following methods are implemented for ventilation in tunnels: 1. Natural Ventilation When a tunnel […]
Highway engineering, Railway Engineering, Tunnels
BMC, Building Construction, Floors
Flagstone Flooring | Building Construction
Flagstone Flooring The floor whose surface is covered by a square or rectangular flagstone slab is called flagstone flooring. Flagstone is
Hydrology, Irrigation Engineering
Failure of Tube Well || Reasons – Corrosion & Incrustation
Failure of Tube Well A tube well may fail for the following reasons: Corrosion of the Well Pipes The Corrosion
Hydrology, Irrigation Engineering
4 Methods of River Bank Protection
Methods of River Bank Protection 4 methods of river bank protection are as follows: 1. Brick Pitching In this method
Highway engineering
What is Cutback? Features, Types, and Uses of Cutback
What is Cutback? The Cutback is a liquid binder, it contains about 80% of bituminous material and 20% solvent. How Cutbacks
Hydrology, Irrigation Engineering
Factors Affecting Evaporation From Water Surface
Factors Affecting Evaporation From Water Surface 5 major factors affecting evaporation from water surface are as follows: 1. Area of
Hydrology, Irrigation Engineering
Types of Rainfall – Cyclonic, Convective, Orographic & Frontal Rain
Types of Rainfall The water that comes back to the surface of the earth in its various forms like rain, snow, hail, etc.
Tunnels
Requirements of Good Ventilation System in Tunnels
Requirements of Good Ventilation System in Tunnels A good tunnel ventilation system should meet the following requirements: 1. It should reduce
Highway engineering, Railway Engineering, Tunnels
7 Shapes of Tunnels – Advantages & Disadvantages
Shapes of Tunnels Commonly used tunnel shapes(Shapes of Tunnels) are discussed below: 1. Polycentric Shaped of Tunnels This sort of
Highway engineering, Railway Engineering, Tunnels
20 Types of Classification of Tunnels
20 Types of Classification of Tunnels Tunnels are generally classified on the basis of their purposes, types of material, and