Procedure For Doing Earthwork in Cutting
Procedure For Doing Earthwork in Cutting The process of cutting and removing earth from its original position, transporting and dumping […]
Highway engineering
Highway engineering
Highway engineering
Procedure For Doing Earthwork in Embankment
Procedure For Doing Earthwork in Embankment The process of cutting and removing earth from borrow pits, transporting and placing it
Highway engineering
3 Objects of Highway Survey
3 Objects of Highway Survey The highway survey is carried out to achieve the following objects, here 3 objects are
Highway engineering
Preliminary Survey || Method || Important Point-Highway Engineering
The survey of highways can be completed in four Stages (map study, reconnaissance survey, preliminary survey, final location and detailed
Highway engineering
4 Steps in Bituminous Road Construction
For bituminous road construction, various steps and techniques are used such as interface treatment (tack coat, prime coat), surface dressing,
Highway engineering
Recommended Values of Camber For Different Types Of Road As Per I.R.C
Recommended Values of Camber For Different Types Of Road As Per I.R.C For different types of road, I.R.C recommended the
Highway engineering
Problems Of Road Construction in Logged Area and Solution
An area is said to be waterlogged when the sub-soil water table comes within 1 m below the ground level.
Highway engineering
Factors Affecting The Length Of Transition Curve
Factors Affecting The Length Of Transition Curve The length of transition curve depends upon the following factors: Rate of change
Highway engineering
4 Functions Of Camber Or Cross Slope
4 Functions of Camber Or Cross Slope The following are the 4 functions of camber or cross slope: 1. To
Highway engineering
Necessity of Providing Extra Widening of Pavement on Curve
Necessity of Providing Extra Widening of Pavement on Curve On curves, the following difficulties are observed, that why extra widening