How to Find Crossing Angle in Railway – Mathematical Problem & Solution
Find the Crossing Angle – Problem & Solution Mathematical Problem: Find the crossing angle of 1 in [latex] 8\frac{1}{2} [/latex] […]
Mathematical Example, Railway Engineering
Railway Engineering
Loop Line in Railway and its Types
Loop Line in Railway? When a branch line leaves from a mainline and again this branch line terminates at the
Railway Engineering
Triangle – Railway Track Junction
Triangle – Railway Track Junction The triangle is a junction of a railway track, which is constructed for changing the
Railway Engineering
Types of Railway Platform || Railway Engineering
Types of Railway Platform The platform is a raised level surface of a railway station, from where either passengers can
Survey Engineering
Calculate the Correct Length of the Tape – Mathematics Problem & Solution
Mathematics Problem – Example: A line of true length 500 m, when measured by a 20 m tape, is reported
Highway engineering
5 Purposes of Providing Superelevation in Roads
Following are the 5 purposes or advantages of providing superelevation on the curve portion of a road.
Railway Engineering
Facilities Required at Railway Stations
Facilities Required at Railway Stations: 1. Public Requirements, 2. Traffic Requirements, 3. Requirements of locomotive department, 4. General Requirement
Railway Engineering
Angle of Crossing in Railway & Methods Used to Determine it
The angle which is formed between the gauge faces of the Vee is known as the crossing angle or angle of the railway crossing.
Railway Engineering
Switch Angle in Railway & Depends On What?
Switch angle or angle of switch divergence is defined as the angle formed between the gauge lines of the stock rail and tongue rail(Switch rails).
Railway Engineering
Bending of Rails on Curves – Railway Engineering
The curvature greater than 3 degrees are considered to be sharp curves. In order to correct the curvature, it is desirable to bend the rails.