Problems Of Road Construction in Logged Area and Solution
An area is said to be waterlogged when the sub-soil water table comes within 1 m below the ground level. […]
Highway engineering
Highway engineering
Factors Affecting The Length Of Transition Curve
Factors Affecting The Length Of Transition Curve The length of transition curve depends upon the following factors: Rate of change
Highway engineering
4 Functions Of Camber Or Cross Slope
4 Functions of Camber Or Cross Slope The following are the 4 functions of camber or cross slope: 1. To
Highway engineering
Necessity of Providing Extra Widening of Pavement on Curve
Necessity of Providing Extra Widening of Pavement on Curve On curves, the following difficulties are observed, that why extra widening
CONCRETE
Slump Testing of Concrete
Slump Testing of Concrete The concrete slump test is done to check the workability of concrete. Following are the slump test theory,
Highway engineering
Transition Curve In Highway-Objects || Types || Essential Requirement
Transition Curve When a vehicle travelling on a straight course(i.e of infinite radius) enters a curve of finite radius, a
Highway engineering, PAVEMENT DESIGN
Necessity of Providing Joints in Cement Concrete Road
Necessity of Providing Joints in Cement Concrete Road Joints are provided in cement concrete road (pavement) to achieve the following
Highway engineering, PAVEMENT DESIGN
Types Of Joints In Cement Concrete Road
Types Of Joints In Cement Concrete Road The joints provided in cement concrete road are classified into the following two
Highway engineering, PAVEMENT DESIGN
Joints in Cement Concrete Roads
Joints in Cement Concrete Roads Joints are provided in cement concrete roads to allow expansion, contraction and warping of the
Highway engineering, PAVEMENT DESIGN
Failure of Flexible Pavement
Failure of Flexible Pavement Flexible pavement failure is defined by the formation of potholes, ruts, cracks, localized depressions and settlement.